What Are The Mistakes In The Buy Of Panels?

1. Particleboard is friendlier than MDF. The difference between particleboard and MDF is that the raw material of particleboard is not completely broken into fibers, but broken into particles, commonly called shavings, which are then added to rubber. MDF is made of wood. The raw material is completely broken and broken into a fibrous form, which is then joined by rubber. The density of particleboard is close to that of MDF, but because the particleboard is pressed by adding particleboard material, the density is not uniform, the middle is low, the two ends are high, so the clamping force is lower than MDF.

And the MDF surface is fine, the flatness is higher than particleboard. But particleboard is better than MDF in terms of moisture absorption and moisture resistance, and the price is lower. Thus, it can be said that qualified MDF and particleboard are functionally different, and neither is friendlier.

2. Solid wood particleboard is a "new environmental protection product"

Both MDF and particleboard have a poor reputation as panel furniture made from MDF and particleboard, which do not meet national standards, is used in many indoor pollution cases. As a result, many salespeople are giving new insights into both types of panels. Name, mislead consumers. The most common name is MDF, also known as particleboard. Solid wood particleboard is the grain of solid wood, and it is absolutely different from solid wood.

3. The joinery board is a solid board.

Joinery board weighs big core board again. The log is cut into strips, spliced into cores, and the outer surface material is processed. Because the main material is solid wood, many salespeople will mention that it is environmentally friendly plate. In fact, the large core board is a kind of wood-based board containing an adhesive.

4. Tripolyhydrogen ammonia board is medium density board.

The panels are colored or wood-grain paper that is immersed in melamine transparent resin and then hot pressed onto the surface of the substrate. After melamine resin curing, veneer has good wear resistance, scratch resistance and other physical functions, and has a certain flame resistance. The panels made of this material are called tripolyhydride ammonia panels and have different substrates. MDF and particleboard can be made into tripolyhydride ammonia board.